Your cart is currently empty!
| ERROR CODE | EXPLAINATION |
| E0 | Traction Motor R.H, Overheating |
| E1 | Traction Motor L.H, Overheating |
| E2 | Pump Motor, Overheating |
| E5 | Traction Inverter R.H, Overheating |
| E6 | Traction Inverter L.H, Overheating |
| E7 | Pump Inverter, Overheating |
| 14 | Traction Motor Current Sensor R.H Fault |
| 15 | Traction Motor R.H, Over-current |
| 16 | Traction Motor R.H, Stall Timer |
| 24 | Traction Motor Current Sensor L.H, Fault |
| 25 | Traction Motor L.H, Over-current |
| 26 | Traction Motor L.H, Stall Timer |
| 34 | Pump Motor Current Sensor Fault |
| 35 | Pump Motor Over-current |
| 40 | Line Contractor Fault |
| 42 | Pump Contractor Fault |
| 45 | Traction Motor R.H Open |
| 46 | Traction Motor L.H Open |
| 47 | Pump Motor Open |
| 50 | Steering Sensor Fault |
| 51 | Accelerator Sensor Fault |
| 52 | Traction Motor R.H Pulse Input Fault |
| 53 | Traction Motor L.H Pulse Input Fault |
| 54 | FC Lever Fault |
| 55 | FC Solenoid Fault |
| 56 | FC Solenoid Current Leak |
| 57 | Pump Motor Pulse Input Fault |
| 60 | Display Communication Fault |
| 61 | Logic Card Initialize Failure |
| 62 | Logics Fault |
| 63 | Traction Inverter R.H Fault |
| 64 | Traction Inverter l.H Fault |
| 65 | Pump Inverter Fault |
| 67 | Input Unit Fault |
| 72 | Contactor Coil Fault |
| 74 | Hydraulic Lock Solenoid Fault |
| 78 | Battery Voltage Too Low |
| 79 | Battery Voltage Too High |
| E | F-N-R Lever or Accelerator, Faulty Setting |
| (E) | Seat Switch, Faulty Setting for Traction |
| (L) | Seat Switch, Faulty Setting For Hydraulic |
| H1 | Lift Lever, Faulty Setting |
| H2 | Tilt Lever, Faulty Setting |
| H3 | Attach1 Lever, Faulty Setting |
| H4 | Attach2 Lever, Faulty Setting |
| H5 | Attach3 Lever, Faulty Setting |
| (LO) | Battery Consumption Too Much |